Montech KING 95 PRO
Montech KING 95 PRO
Couldn't load pickup availability
The PC Aquarium: Montech KING 95 PRO
Dive into a new kind of build with the Montech KING 95 PRO. This dual-chamber case gives you a panoramic, aquarium-like view of your components through its unique curved tempered glass. It comes with a whopping six pre-installed ARGB fans, so your build is ready to shine and stay cool right out of the box. With its clever design and included accessories, building your PC is a smooth, enjoyable experience.
⭐ Highlights
⭐ Highlights
Dual-Chamber Curved Tempered Glass Design | Six ARGB PWM Fans Pre-Installed (Reverse Flow) | Switchable Glass or Mesh Front Panel | Patented Rotating Side Fan Bracket | 420mm GPU Clearance & 360mm Radiator Support
⚙️ Specifications
⚙️ Specifications
Case Form Factor: Mid-Tower (Dual-Chamber)
Motherboard Compatibility: ATX, Micro-ATX, Mini-ITX
Case Dimensions: 475 x 300 x 442 mm (H x W x D)
Max GPU Length: 420 mm
Max CPU Cooler Height: 175 mm
Radiator Support: Top: 360mm / 280mm, Side: 240mm / 280mm, Rear: 120mm
Drive Bays: 5 x 3.5" HDD, 8 x 2.5" SSD
Fan Support: Top: 3 x 120mm or 2 x 140mm, Side: 2 x 120mm or 2 x 140mm, Bottom: 3 x 120mm or 2 x 140mm, Rear: 1 x 120mm
Front Panel I/O: 2 x USB 3.0, 1 x USB-C, Headphone/Mic combo jack
Case Material: Steel, Tempered Glass
Side Panel Type: Tempered Glass (curved front/side panel)
Included Fans: 2 x 140mm ARGB PWM fans (Side), 3 x 120mm ARGB PWM fans (Bottom), 1 x 120mm ARGB PWM fan (Rear)
Share
The POST-Check Protocol
-
Component Clearance
Action: Double-check the case's specifications for maximum GPU length, CPU cooler height, and radiator support before purchasing any part. Why: These are fixed limitations; if your CPU cooler is too tall or your GPU is too long, the side panel won't close or the components will physically block installation.
-
Standoff Alignment
Action: Verify the case has motherboard standoffs installed only in the locations that correspond to the holes on your specific motherboard (ATX, Micro-ATX, etc.). Why: Incorrectly placed standoffs can touch the back of the motherboard and cause a disastrous electrical short when the system is powered on.
-
I/O Panel Installation
Action: If the case uses a removable I/O shield (not pre-installed on the motherboard), snap it into the casebefore mounting the motherboard. Why: This is a common beginner mistake that forces you to remove the entire motherboard just to fit a small metal plate.
-
Airflow Pathway
Action: Follow the simple rule: Intake fans at the front/bottom draw cool air in, and Exhaust fans at the rear/top push hot air out. Why: A balanced, directed airflow path is the single most important factor for overall system temperature and long-term component health.
-
PSU Fan Direction
Action: When mounting the Power Supply Unit (PSU) at the bottom of the case, ensure its fan is facing downward toward the case's dust filter and external vent. Why: This configuration allows the PSU to pull cool, filtered air directly from outside the case, keeping its own temperature low and promoting overall case airflow.
-
Front Panel Headers
Action: Use the motherboard manual to correctly connect the tiny Front Panel Header cables (Power Button, Reset, USB, Audio) to the correct pins on the motherboard. Why: These small cables are essential for powering the system on and are often confusingly labeled, but the manual is the only sure guide for proper function.